TY - JOUR AU - Midzak, Natalie AU - Yorks, John AU - Zhang, Jianglong AU - Limbacher, James AU - Garay, Michael AU - Kalashnikova, Olga PY - 2022 M3 - Original Research TI - Constrained Retrievals of Aerosol Optical Properties Using Combined Lidar and Imager Measurements During the FIREX-AQ Campaign JO - Frontiers in Remote Sensing UR - https://www.frontiersin.org/articles/10.3389/frsen.2022.818605 VL - 3 SN - 2673-6187 N2 - Smoke aerosols arise from a variety of regional sources and fuel types dependent on the properties of the fire, leading to spatial variability in smoke composition and optical properties. After emission, these aerosols age and mix in the atmosphere with other aerosol species, such as sulfates, altering the optical, and microphysical properties of the smoke aerosols over time. Thus, lidar ratio (extinction to backscatter ratio) derived from lidar sensors exhibit spatiotemporal variability for smoke. Traditional backscatter lidar processing algorithms employ a signal loss method that utilizes the reduction of signals below and above cloud layers, enabling simultaneous retrievals of both layer-averaged lidar ratio and particulate extinction, which avoids the need for assigning lidar ratios based on layer type as is typically used for backscatter lidar algorithms. In this study, the signal loss method, which is traditionally designed for cloud property retrievals, is attempted for elevated smoke plume property retrievals using NASA’s Cloud Physics Lidar (CPL) observations from the 2019 Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) field campaign. Good agreement (linear correlation coefficient of 0.67) is found between aerosol optical depth (AOD) derived from the signal loss method and the constrained method, utilizing collocated GOES MAGARA AOD values as constraints for lidar ratio retrievals, for the Williams Flats smoke event. Differences in derived lidar ratios from the signal loss method and the constrained method (13.6 and 7.4%) are found to be smaller than the expected signal loss lidar ratio error estimate of ∼17–23%. A good agreement is also found in lidar ratios derived from this study and from using Differential Absorption Lidar-High Spectral Resolution Lidar (DIAL-HSRL) measurements for the Williams Flats Fire. The lidar ratio statistics of smoke plumes presented in this analysis (51 ± 13 sr) also compare favorably with lidar ratio values found in previous studies; however, they remain lower than the assumed smoke lidar ratio of 70 sr (at 532 nm) used by CALIPSO and CPL, and vary with plume transport distance. These findings suggest lidar ratio is likely to be regionally specific and evolve with plume transport. Thus, innovative methods for simultaneous retrieval of lidar ratio and aerosol extinction, such as the signal loss method proposed in this study, are needed for accurate aerosol retrievals from standard backscatter lidars in the future. ER -