Original Research

Published on 20 Jun 2023

Nano drug delivery platform based on thermosensitive PEG-PCL hydrogel encapsulated in silver-bearing micelles and its antifungal activity investigation against vaginal candidiasis

in Smart Materials

Fatemeh Hosseinzadeh
Hadi Tabesh
Farah Farzaneh

Frontiers in Materials

doi 10.3389/fmats.2023.1210542

1,939 views
1 citation

Original Research

Published on 19 Jun 2023

Influence of parameters on the ultimate penetration depth of a double-plate vertically loaded anchor in soft clay

in Structural Materials

Guoqi Xing
Yupeng Cao
Baoliang Zhang
Jian Li
Xiaotong Zhang

Frontiers in Materials

doi 10.3389/fmats.2023.1225258

1,684 views
1 citation

Original Research

Published on 19 Jun 2023

The durability of basalt-fiber-reinforced cement mortar under exposure to unilateral salt freezing cycles

in Mechanics of Materials

Jiguo Zhou
Guihua Wang
Guangxing Zhu

Frontiers in Materials

doi 10.3389/fmats.2023.1202889

1,696 views
1 citation

Editorial

Published on 16 Jun 2023

Editorial: Biodegradable polymers for biomedical applications-Volume II

in Biomaterials and Bio-Inspired Materials

Himansu Sekhar Nanda
Liqun Yang
Jianshe Hu
Shuai Jiang
Hongli Mao

Frontiers in Materials

doi 10.3389/fmats.2023.1231445

2,337 views

Original Research

Published on 15 Jun 2023

Effects of moisture content on strength and compression properties of foundation soils of cultural relics in areas flooded by the Yellow River

in Environmental Degradation of Materials

Shaochun Ma
Yudi Yao
Peng Bao
Chengchao Guo

Frontiers in Materials

doi 10.3389/fmats.2023.1186750

4,391 views
2 citations

Original Research

Published on 15 Jun 2023

Development of flax/basalt/PA11 bio-composites: optimal formulation and modelling of the quasi-static behaviour

in Polymeric and Composite Materials

Wassim Guerfala
Patrick Rozycki
Christophe Binetruy

Frontiers in Materials

doi 10.3389/fmats.2023.1176408

2,733 views

Original Research

Published on 15 Jun 2023

Experimental study on the variation rule of water level outside the pit caused by dewatering in the pit and the rule of reinjection outside the pit

in Structural Materials

Qingyuan Yang
Song Chen
Ying Yuan

Frontiers in Materials

doi 10.3389/fmats.2023.1192557

2,246 views

Original Research

Published on 15 Jun 2023

Darcy–Benard–Oldroyd convection in anisotropic porous layer subject to internal heat generation

in Colloidal Materials and Interfaces

Mahantesh S. Swamy
B. N. Hanumagowda
Umair Khan
K. Vidyashree
Ahmed M. Hassan
Abdulkafi Mohammed Saeed
Ranvijay Kumar

Frontiers in Materials

doi 10.3389/fmats.2023.1158644

2,381 views

Original Research

Published on 15 Jun 2023

Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard

in Polymeric and Composite Materials

Waheed Gul
Syed Riaz Akbar Shah
Afzal Khan
Naveed Ahmad
Sheraz Ahmed
Noor Ain
Arshad Mehmood
Bashir Salah
Syed Sajid Ullah
Razaullah Khan

Frontiers in Materials

doi 10.3389/fmats.2023.1206918

4,090 views
5 citations

Original Research

Published on 15 Jun 2023

Investigating the retarding effect of CAC in alkali-activated cements

in Structural Materials

Laura Stefanini
Brant Walkley
John L. Provis

Frontiers in Materials

doi 10.3389/fmats.2023.1212177

2,719 views

Review

Published on 15 Jun 2023

Electron beams near surfaces: the concept of partial intensities for surface analysis and perspective on the low energy regime

in Computational Materials Science

Wolfgang S. M. Werner

Frontiers in Materials

doi 10.3389/fmats.2023.1202456

2,835 views

Original Research

Published on 14 Jun 2023

Effect of shear ratio on rheological properties of suspension in two-step flocculation process for fine iron tailings

in Polymeric and Composite Materials

Ying Yang
Aixiang Wu
Xiancheng Wang
Guoli Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1217947

2,395 views

Editorial

Published on 13 Jun 2023

Editorial: Emerging chip materials and devices for post Moore’s era

in Semiconducting Materials and Devices

Enbo Zhu
Zhengwei Zhang
Chen Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1224537

1,169 views
1 citation

Original Research

Published on 13 Jun 2023

Synthesis of novel Fe3O4 nanostructures surrounded by Ti-MOF nanostructures as bioactive and efficient catalysts in three-component synthesis of new pyrazole derivatives

in Polymeric and Composite Materials

Balsam Qubais Saeed
Ibrahem Waleed
Hussein Humedy Chlib Alkaaby
Sabrean Farhan Jawad
Usama S. Altimari
Ziyad Shihab Ahmed AL-Sarraj
Ruwaida T. Shbeeb
Salema K. Hadrawi
Muath Suliman
Mohammad Y. Alshahrani

Frontiers in Materials

doi 10.3389/fmats.2023.1156702

830 views

Editorial

Published on 13 Jun 2023

Editorial: Additive manufacturing for polymers

in Polymeric and Composite Materials

Xuan Zhou
Jianlei Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1230323

624 views

Original Research

Published on 12 Jun 2023

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches

in Polymeric and Composite Materials

P. D. Mulye
L. Morançay
C. Binetruy
S. Comas-Cardona
A. Leygue
D. Guillon

Frontiers in Materials

doi 10.3389/fmats.2023.1176482

1,096 views

Navigation group

Articles

Nano drug delivery platform based on thermosensitive PEG-PCL hydrogel encapsulated in silver-bearing micelles and its antifungal activity investigation against vaginal candidiasis

Influence of parameters on the ultimate penetration depth of a double-plate vertically loaded anchor in soft clay

The durability of basalt-fiber-reinforced cement mortar under exposure to unilateral salt freezing cycles

Editorial: Biodegradable polymers for biomedical applications-Volume II

Effects of moisture content on strength and compression properties of foundation soils of cultural relics in areas flooded by the Yellow River

Development of flax/basalt/PA11 bio-composites: optimal formulation and modelling of the quasi-static behaviour

Experimental study on the variation rule of water level outside the pit caused by dewatering in the pit and the rule of reinjection outside the pit

Darcy–Benard–Oldroyd convection in anisotropic porous layer subject to internal heat generation

Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard

Investigating the retarding effect of CAC in alkali-activated cements

Electron beams near surfaces: the concept of partial intensities for surface analysis and perspective on the low energy regime

Effect of shear ratio on rheological properties of suspension in two-step flocculation process for fine iron tailings

Editorial: Emerging chip materials and devices for post Moore’s era

Synthesis of novel Fe3O4 nanostructures surrounded by Ti-MOF nanostructures as bioactive and efficient catalysts in three-component synthesis of new pyrazole derivatives

Editorial: Additive manufacturing for polymers

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches